Figure 4-11, Drive configuration menu, Drive configuration – HP NonStop G-Series User Manual
Page 51
Controls and Indicators on the CTL700 Tape Library
L700 (CTL700) Installation and User’s Guide — 527338-004
4- 11
Display Screens
Drive Configuration
Accessible from the Main Configuration menu, the drive configuration menu lets you
modify portions of each drive’s configuration.
shows an example screen.
For each drive, the menu displays the drive position, drive type, SCSI ID and indicates
whether the drive is on the same SCSI bus as the library.
The panel displays only 16 lines per screen. If the library contains more than eight
drives, use the down arrow button to scroll to drive 09 and higher. For more
information, see
Entering Tape Drive Information
Note.
The cursor position is saved on all screens that list the tape library’s tape drives.
Figure 4-11. Drive Configuration Menu