HP NonStop G-Series - Manual (Page 4)

Contents
L700 (CTL700) Installation and User’s Guide — 527338-004
ii
4. Controls and Indicators on the CTL700 Tape
Library
Fiber Cables 3-9
Connecting the Tape Library Power Cable 3-10
Routing the Power Cable 3-10
Connecting Power 3-11
Terminate the SCSI Bus 3-12
After Installation is Complete 3-12
4. Controls and Indicators on the CTL700 Tape Library
Operator Panel 4-1
Indicators 4-3
Buttons 4-3
Display Screens 4-3
Operations Overview 4-12
Tape Library Power Switch 4-13
Tape Drive Power Switches 4-15
5. Configuring and Testing the Tape Library
Overview of Configuration 5-1
Tape Library Capacity 5-1
Entering Configuration Data 5-3
Using the Operator Panel 5-3
Providing Configuration Information 5-3
Setting Screen Characteristics 5-7
Setting Cleaning Cartridge Information 5-8
Entering Tape Drive Information 5-9
Verifying Configuration 5-11
Performing the Final Steps 5-11
Initialization Sequence 5-11
Initialize and Calibrate Mechanisms 5-12
Vision Calibration 5-12
Hand Assembly Testing 5-12
Audit 5-12
Tape Drive Targeting 5-13
Audit Drive Targeting 5-13
Testing the Tape Library 5-14
Installing Diagnostic and Cleaning Cartridges 5-14
Running Diagnostic Tests 5-16
Loading Tapes Into the Tape Library 5-18
Placing the Tape Library Online 5-20