HP NonStop G-Series - Manual (Page 22)

Unpacking the Tape Library
L700 (CTL700) Installation and User’s Guide — 527338-004
2 -4
Physically Unpacking the Tape Library
Physically Unpacking the Tape Library
You will need diagonal cutters or a knife to cut the shipping straps. Refer to Figure 2-3
while unpacking:
1. Remove and retain the shipping bill.
2. While holding the shipping ramp against the tape library box covers, carefully cut
the wrapping straps on the exterior of the packaging.
3. Remove the ramp and corrugated box covers.
4. Remove the shipping bag (not shown).