Opening the tape library front doors, Figure 6-2, Opening the access doors – HP NonStop G-Series User Manual

Page 86

Advertising
background image

Operating the Tape Library

L700 (CTL700) Installation and User’s Guide 527338-004

6- 10

Opening the Tape Library Front Doors

Opening the Tape Library Front Doors

You must open the front doors on the tape library to perform manual operations. Refer
to

Figure 6-2

as you perform this procedure.

1. Check that all jobs have ended and that the tape library is offline.

2. Open the tape library right front door by pulling on the left side of the door.

3. Open the tape library left front door by using a latch key to unlock both locks. Turn

the key counterclockwise to unlock them, and then pull open the door.

Figure 6-2. Opening the Access Doors

Advertising
This manual is related to the following products: