Testing the tape library, Installing diagnostic and cleaning cartridges, Figure 5-2 – HP NonStop G-Series User Manual
Page 70: Ct9840-1/ct9840fc-1/ct9841fc-1 cartridge
Configuring and Testing the Tape Library
L700 (CTL700) Installation and User’s Guide — 527338-004
5- 14
Testing the Tape Library
Testing the Tape Library
This section describes diagnostic and cleaning tape cartridges within the tape library
and describes diagnostic tests that are performed before placing the tape library
online.
Installing Diagnostic and Cleaning Cartridges
If diagnostic and cleaning cartridges are being installed, place them within the tape
library prior to initialization.
Use diagnostic cartridges to run motion and loading tests for cartridge drives.
Automatic cleaning activates the robot to load and unload a cleaning cartridge when a
tape drive requires cleaning.
Figure 5-2. CT9840-1/CT9840FC-1/CT9841FC-1 Cartridge
Caution.
Check with the system administrator for the tape drive cleaning option that is to be
used. The auto clean option is automatically configured when cleaning cartridges are placed in
the reserved area.