HP OneView - Manual (Page 111)

12 Quick Start: Configuring an enclosure and server blade
for Direct attach to an HP 3PAR Storage System
This quick start describes the process for adding and configuring an enclosure so that its servers
can connect to an HP 3PAR Storage System that is directly attached to the enclosure.
Prerequisites
•
Minimum required privileges: Infrastructure administrator or Network administrator for adding
the networks.
•
Minimum required privileges: Infrastructure administrator or Server administrator for adding
the enclosure and server profiles.
•
The HP 3PAR Storage System is installed and configured and the cables are attached to the
enclosure you want to use.
•
See “Prerequisites for bringing an enclosure under management” (page 157) for prerequisites
and preparation you must complete before you add an enclosure.
•
See “Prerequisites for bringing server hardware under management” (page 125) for prerequisites
and preparation you must complete before you add a server.
111