HP OneView User Manual
Page 301
Value
Attribute
2.5
(the default value)
Requested bandwidth
Auto
(the default value)
Port
For both connections, select Not bootable
Boot
c.
Add one connection to the FC 3 network. Enter the information shown in the following
table, and then click Add + to add the connection and reopen the dialog box for the next
step.
Value
Attribute
Fibre Channel
Device type
FC 3
Network
2.5
(the default value)
Requested bandwidth
Auto
(the default value)
Port
Not bootable
Boot
d.
Add one connection to the FC 4 network. Enter the information shown in the following
table, and then click Add to add the connection and close the dialog box.
Value
Attribute
Fibre Channel
Device type
FC 4
Network
2.5
(the default value)
Requested bandwidth
Auto
(the default value)
Port
Not bootable
Boot
The following illustration shows all the connections added.
Add Connection
Connections
ID
Type
Address
Network
Requested
Port
Boot
bandwidth (Gb/s)
.........................................................................................................................
1
Ethernet
Auto
dev networks
2.5
Auto
Not bootable
X
2
Ethernet
Auto
dev networks
2.5
Auto
Not bootable
X
3
Ethernet
Auto
2.5
Auto
Not bootable
X
4
Ethernet
Auto
2.5
Auto
Not bootable
X
5
Auto
2.5
Auto
Not bootable
X
6
Fibre Channnel
Auto
FC 4
2.5
Auto
Not bootable
X
FC 3
test networks
tsst networks
Fibre Channnel
5.
Scroll down to see other items in the dialog box.
6.
Configure the boot order for this server profile. Manage boot order is selected by default.
Drag and drop the items so that they are in this order:
A.5 Provisioning eight host servers for VMware vSphere Auto Deploy 301