HP OneView - Manual (Page 161)

5. Select User guide.
6. Find the HP BladeSystem Onboard Administrator Command Line Interface User Guide title
and view or download to your local computer.
20.6.3 Disallowed OA commands
The following commands are not allowed in an enclosure configuration script because they conflict
with the appliance configuration and could prevent the appliance from operating properly and
securely.
Disallowed OA commands
SET ENCLOSURE NAME REMOVE CA CERTIFICATE ADD EBIPA
SET ENCLOSURE SERIAL_NUMBER REMOVE EBIPA ADD EBIPAV6
SET ENCRYPTION REMOVE EBIPAV6 CLEAR NTP
SET FACTORY REMOVE HPSIM CERTIFICATE CLEAR VCMODE
SET FIPS MODE REMOVE OA ADDRESS IPV6 DISABLE
DHCP_DOMAIN_NAME
SET HPSIM TRUST MODE REMOVE SNMP TRAPRECEIVER DISABLE EBIPA
SET IPCONFIG REMOVE SNMP TRAPRECEIVER
V3 DISABLE EBIPAV6
SET NTP REMOVE SNMP USER DISABLE FIRMWARE
MANAGEMENT
SET NTP PRIMARY REMOVE TRUSTED HOST DISABLE HTTPS
SET OA DOMAIN_NAME REMOVE USER CERTIFICATE DISABLE IPV6
SET OA NAME REMOVE USER vcmuser DISABLE IPV6DYNDNS
SET PASSWORD REMOVE USERS ALL DISABLE NTP
SET SNMP COMMUNITY READ SAVE EBIPA DISABLE SLAAC
SET SSO TRUST MODE SAVE EBIPAV6 DISABLE SNMP
SET TIMEZONE SET DATE DISABLE TRUSTED HOST
SET USER ACCESS vcmuser SET EBIPA DISABLE USER vcmuser
SHOW ALL SET EBIPAV6 ENABLE
DHCP_DOMAIN_NAME
SHOW SYSLOG { OA | HISTORY } SET EBIPA INTERCONNECT ENABLE EBIPA
UNASSIGN { SERVER | INTERCONNECT } { <bay
number> | ALL | <bay number range> } vcmuser SET EBIPA SERVER ENABLE EBIPAV6
UNASSIGN OA vcmuser SET ENCLOSURE ASSET TAG ENABLE FIRMWARE
MANAGEMENT
20.7 Effects of managing an enclosure
When an enclosure is being managed by the appliance, the following enclosure settings are in
effect:
•
A management account is created.
•
SNMP is enabled and the appliance is added as an SNMP trap destination.
•
NTP (Network Time Protocol) is enabled and the appliance becomes the NTP time source.
20.7 Effects of managing an enclosure 161