HP OneView - Manual (Page 258)

Possible cause and recommendation Symptom
A possible cause of a volume not being accessible on the server is that the connection has not
been defined in the server profile.
Add a connection to a Fibre Channel network in the server profile
1. From the main menu , select Server Profiles.
2. In the master pane , select a server profile and select Actions →Edit.
3. Under Connections click Add Connection.
4. For Device type select Fibre Channel.
5. For Network select a network that is connected to the storage system and click Add.
6. Click OK.
31.16.4 Volume has been moved to a storage pool that is not managed by the
appliance
Possible cause and recommendation Symptom
Move the volume to a pool that is managed by the appliance and refresh the
volume using the storage system software
•
See the storage system documentation.
Bring the storage pool in which the volume resides under management of the
appliance
NOTE: If the volume was moved by Adaptive Optimization, HP recommends bringing all
pools that Adaptive Optimization might use under management of the appliance. This will
ensure that the volume is still available to the appliance if it is moved by Adaptive Optimization.
1. From the main menu , select Storage Pools, and do one of the following:
• Click + Add storage pool in the master pane .
• Select Actions→Add.
2. For Storage System, select the storage system that contains the storage pools you want to
add.
3. For Storage Pool, select the storage pool you want to add.
4. Click Add to add the storage pool, or click Add + add another pool.
You can also use the REST API to complete this task.
REST API: /rest/storage-pools
See the HP OneView REST API Reference for more information.
Volume is not in a
normal state The
volume is visible from
the storage system, but
not from the
appliance.
258 Troubleshooting