HP OneView - Manual (Page 149)

only enclosures that you add after the configuration change are configured with the new uplink
set configuration.
When you add an enclosure and assign an enclosure group, the appliance creates a logical
interconnect for that enclosure. The logical interconnect it creates matches the configuration specified
by the logical interconnect group that is associated with the enclosure group. When the add
operation completes, the interconnects are fully configured and the networks are available for use
by server profiles.
Figure 13 Relationship of a logical interconnect group to a logical interconnect
Logical Interconnect LI1
<create> <create> <create>
Enclosure Group
enclosure Type - c7000
Stocking Mode - enclosure
LIG
Logical Interconnect Group A
Domain Networks: Eth1, Eth2, SanA, SanB
Uplink Sets -
- 1 - Blue Network, bay1.x1 & bay2.x1
Interconnect Maps
Enclosure A
638526-B21, Int1
571956-B21, Int3
EMPTY
EMPTY EMPTY
EMPTY
571956-B21, Int4
638526-B21, Int2
I/O Bay Logical Interconnect Group
1 logicalInterconnectGroupA
logicalInterconnectGroupA
2
4
3
Location Interconnect Types(s) Logical Downlink
Enc2. Bay2 638526821
571956B21
Logical DownlinkA
Enc3. Bay3 Logical DownlinkA
Enc4. Bay4 571956B21 Logical DownlinkA
Logical DownlinkA Enc1. Bay1 638526821
Location Int. Int. Type(s)
EncA. Bay1
EncA. Bay2
EncA. Bay4
Int1 638526B21
638526B21
Int2
Int3
Int4
EncA. Bay3 571956B21
571956B21
LD A
LD A
LD B
LD C
LD
Logical Interconnect LI2
Enclosure B
638526-B21, Int1
571956-B21, Int3
EMPTY
EMPTY EMPTY
EMPTY
571956-B21, Int4
638526-B21, Int2
Location Int. Int. Type(s)
EncB. Bay1
EncB. Bay2
EncB. Bay4
Int1 638526B21
638526B21
Int2
Int3
Int4
EncB. Bay3 571956B21
571956B21
LD A
LD A
LD B
LD C
LD
Logical Interconnect LI3
Enclosure C
638526-B21, Int1
571956-B21, Int3
EMPTY
EMPTY EMPTY
EMPTY
571956-B21, Int4
638526-B21, Int2
Location Int. Int. Type(s)
EncC. Bay1
EncC. Bay2
EncC. Bay4
Int1 638526B21
638526B21
Int2
Int3
Int4
EncC. Bay3 571956B21
571956B21
LD A
LD A
LD B
LD C
LD
Domain Networks: Eth1, Eth2, SanA, SanB
Uplink Sets: ...
Interconnect Maps
Domain Networks: Eth1, Eth2, SanA, SanB
Uplink Sets: ...
Interconnect Maps
Domain Networks: Eth1, Eth2, SanA, SanB
Uplink Sets: ...
Interconnect Maps
logicalInterconnectGroupA
You can create a logical interconnect group independently of adding an enclosure, or you can
edit the logical interconnect group that the appliance creates when you add the enclosure to the
appliance. When you add the first enclosure to the appliance, the preliminary logical interconnect
group is based on the physical interconnects in that enclosure and is created with the following
properties:
•
Existing interconnect types in their existing positions
•
All physical uplink ports disabled except for stacking links
You can edit this logical interconnect group, and when the configuration is complete, an enclosure
group is created and associated with this logical interconnect group.
If you assign an enclosure group (which includes a logical interconnect group) to an enclosure in
which the interconnects installed in the enclosure do not match the logical interconnect group, each
interconnect reports its state as unmanaged. The physical interconnect configuration in the enclosure
must match the logical interconnect group before an interconnect can be managed.
To delete a logical interconnect group, you must delete the associated enclosure group.
19.2 Managing logical interconnects and logical interconnect groups 149