HP OneView - Manual (Page 70)

Figure 8 Notifications area
Model
Manag
Location
Power
Maximum
Serial
General
Overview A, Slot 1
!
The system A, Slot 1 is not configured for redundant power because it has 1 c...
>
A, Slot 1
All
All
0 0 1
0 0 1
The system A, Slot 1 is ...
The system A, Slot 1 is notconfigured for redundant power because it has 1
connected power input(s). The system must have at least 2 connected power
inputs(s) to have redundant power.
Resolution: Configure the system with 1 more redundant power delivery
device(s) or verify that the configuration matches the target system
Powered by
Maximum power
Serial number parentLS1
280 Watts
a963fdec-ebfb-4ba4
Actions v
Actions v Overview !
1
2
1 A collapsed notifications area (the default). Select All to view all activity associated with the
resource.
2 An expanded notifications area, which provides resolutions for critical or warning alerts that
require your attention, with links to Details, when they are available.
4.12 Log out of the appliance
1. Click the Session control icon in the banner .
2. Select Logout.
administrator
Logout
Logged in 6 minutes ago
4.13 Perform an action on multiple resources
For some actions, you can select multiple resources in the rather than performing the action on one
resource at a time. For example, you can power on many server blades with one operation. Each
action on a resource instance is logged individually in the Activity screen.
If the action cannot be performed on a specific resource instance, the resource is excluded from
the action. For example, if you try to power on a server that is already powered on, the action is
not performed on that server. Opening the
“Activity sidebar” (page 64) for an action displays the
results, which in this example, shows that one server was powered on and two were excluded:
70 Navigating the graphical user interface