HP NetRAID-4M Controller - Manual (Page 105)

5-27
Working with Disksets
After running the disk_set changespare pool command to
change a diskset’s sparepool assignment, use the disk_set list
command to display information about your disksets, as in the
following example. In the example, the Spare column indicates YES,
which means that the diskset is assigned as a sparepool. Note that
the example alters the
disk_set list output so that the data can
fit on the page.
HPN0> disk_set list
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
3 NO NO Mercury YES YES
❒