HP NetRAID-4M Controller - Manual (Page 209)

9-1
9
Modifying Containers
This chapter explains how to use the CLI commands to manipulate
and modify containers. Before you can work with containers, you
must have previously opened the controller. See Opening and Closing
a Controller in Chapter 3, for a description of how to open a
controller. In addition, you must have initialized your disk or disks
to prepare them for container operations. See Working with Disks in
Chapter 4 for a description of how to initialize a disk.
See the Flexible Array Storage Tool User’s Guide for a discussion of
single-level and multi-level container concepts. Also see Chapter 7,
Working With Single-level Containers, for information on creating
single-level containers, and Chapter 8, Working with Multi-level
Containers, for information on creating multi-level containers.
The following table provides a quick reference to the topics covered
in this chapter:
For information about… Turn to…
Working with Container Reconfiguration page 9-2
Working with Container Promotion page 9-6
Working with Adding a Level to a Container page 9-8
Working with Mirror Sets page 9-10
Working with a RAID-5 Set page 9-16
Working with the Raw Container Cache page 9-20
Working with Container Rebuild page 9-27
Working with File Systems page 9-33