HP NetRAID-4M Controller - Manual (Page 270)

11-2
Command Line Interface User’s Guide
Understanding Diagnostic Attributes
Diagnostic attributes are the characteristics of a controller that can
be administered for the purpose of isolating potential controller
problems. Table 11-1 lists the diagnostic attributes and their related
CLI commands.
Table 11-1. Diagnostic Attributes
The following sections describe how to display and, if appropriate,
manipulate the disk attributes.
Displaying the Interrupt Count
The interrupt count attribute indicates the default interrupt
count on a controller. The interrupt count is the number of
outstanding I/O requests on a controller needed before the
controller sends an interrupt to the host computer. The interrupt
count and interrupt response time determine when an interrupt is
sent to the host computer. For example, if the interrupt count is set
Attribute
CLI
Operations
Related Commands Discussed in ...
interrupt
count
set
show
diagnostic
moderation set
count
diagnostic
moderation show
count
Displaying the
Interrupt Count
interrupt
response time
set
show
diagnostic
moderation set
timer
diagnostic
moderation show
timer
Displaying the
Interrupt
Response Time
boot parameter clear
set
show
diagnostic
clear
boot_parameters
diagnostic set
boot_parameters
diagnostic show
boot_parameters
Displaying a
Boot-time
Parameter