HP NetRAID-4M Controller - Manual (Page 88)

5-10
Command Line Interface User’s Guide
------ -------- ---------- ---------- ------ -------- -------
1 NO NO Saturn YES YES 5/26/2000-14:30:56
Displaying Members of a Diskset
The members attribute indicates the SCSI device ID for all disk
drives that reside in a diskset. You specify the disk drives that
initially reside in a diskset when you create a diskset using the
disk_set create command. See Creating a Diskset on page 5-11
for information on creating a diskset. You add disks to a diskset
using the
disk_set add command. See Adding a Disk to a Diskset
on page 5-12 for information on adding disks to a diskset. You
remove disks from a diskset using the
disk_set remove
command. See Removing a Disk from a Diskset on page 5-13 for
information on removing disks from a diskset. You can also delete
all disks from a diskset using the
disk_set delete command. See
Deleting a Diskset on page 5-15 for information on deleting a diskset.
To display the SCSI device ID for all disk drives that reside in a
diskset, use the
disk_set list command with the /members
switch, as in the following example. In the example, the C:ID:L
column indicates that 2:00:0 is the only disk drive that resides on the
diskset.
HPN0> disk_set list /members
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
1 NO NO Saturn YES YES
Members of the Disk Set:
C:ID:L
-------
2:00:0