HP StorageWorks XP Remote Web Console Software - Manual (Page 100)

Table 19 PPRC Commands
Siz Remote
Web Console
Operation
TSO Command ICKDSF
Command
Function Specified Volume
Set Reserve
Attribute
Not required Not required
Sets the reserve
attribute of the
specified volume
Simplex and offline
to host.
Reset Reserve
Attribute
Not required Not required
Resets reserve
attribute of the
specified volume
Simplex.
Add Pair CESTPAIR PPRCOPY ESTPAIR
Adds a pair,
starts initial copy
operation, and
changes status to
duplex
Simplex.
Add and Split Pair CESTPAIR PPRCOPY ESTPAIR
Adds and
simultaneously splits
a pair
Simplex.
Quick Split Pair CSUSPEND
PPRCOPY
SUSPEND
Splits a pair, starts
quick split operation Duplex or pending.
Steady Split Pair CSUSPEND
PPRCOPY
SUSPEND
Splits a pair,
starts steady split
operation
Duplex or pending.
Normal Resync Pair CESTPAIR PPRCOPY ESTPAIR
Resynchronizes a
pair, starts normal
resync
Split, V-split or
suspended.
Quick Resync Pair CESTPAIR PPRCOPY ESTPAIR
Resynchronizes a
pair, starts quick
resync
Split, V-split or
suspended.
Reverse Copy Pair CESTPAIR PPRCOPY ESTPAIR
Resynchronizes a
pair, starts reverse
copy
Split.
Quick Restore Pair CESTPAIR PPRCOPY ESTPAIR
Resynchronizes a
pair, starts quick
restore
Split.
Delete Pair CDELPAIR PPRCOPY DELPAIR
Deletes a pair,
changes status to
simplex
Other than simplex.
Suspend Pair Not available* Not available*
Stops update copy
operations
Other than simplex.
Detail (the Detail
dialog box), the
History window
CQUERY PPRCOPY QUERY
Displays detailed
pair status
information
Any volume status
is OK.
* You cannot request Siz suspend operations using PPRC commands. The CSUSPEND/PPRCOPY
SUSPEND commands execute split operations on Siz pairs.
PPRC Command Parameter
Table 20 on page 101 lists and describes the TSO command parameters supported by Siz.
100 Using PPRC Commands for Hitachi ShadowImage for z/OS