HP StorageWorks XP Remote Web Console Software - Manual (Page 69)

NOTE:
The settings in the Display Filter dialog box are only effective within the current Siz operations. If you
switch to another option program (e.g., TCz), or click a button on the toolbar on the Remote Web
Console main window, the settings in the Display Filter are reset.
Preset List
The Preset List box (see Figure 31 on page 69) is located below the Volume List, and lists the specified
zSeries and IBM System z operations (volume/pair information), which have not been applied to in
the HP StorageWorks XP12000 storage system.
NOTE:
The Preset List allows you to hold multiple settings of the same operation (e.g., Add Pair) only. You cannot
display different types of operations (e.g., Split Pair and Resync Pair) in the Preset List box at the same
time. You can also cancel the operations in the Preset List at any time before they are applied to the HP
StorageWorks XP12000 storage system by clicking the Apply button.
Figure 31 Preset List
The Preset List box displays the following information of specified operations:
• Source Vol: The CU:LDEV (control unit image:logical device ID) of the S-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200 .
• Target Vol: The CU:LDEV (control unit image:logical device ID) of the T-VOL.
NOTE:
An LDEV number that ends with a “#” mark indicates that the LDEV is an external volume (e.g.
00:01#). For more information, see the HP StorageWorks External Storage XP user guide for the
XP12000, XP10000, SVS200 .
• Copy Pace: The copying pace for all pairs being added: Slower, Medium, and Faster.
• CLPR (S): The cache logical partition (CLPR) of the S-VOL.
• CLPR (T): The cache logical partition (CLPR) of the T-VOL.
• Code: The reason code is displayed if the preset operations (settings) cannot be applied
successfully with the Apply button.
To perform the specified operations, you must click the Apply button on the Siz main window. When all
the operations are performed successfully, the Preset List box is cleared. If some operations cannot be
Hitachi ShadowImage for z/OS user guide 69