HP StorageWorks XP Remote Web Console Software - Manual (Page 93)

Code Message Description
0028
RELEASING OF THE EXPANSION
SETTING ENDED NORMAL
The release process of relationship
expansion ended normally.
0029 INITIALIZE ENDED NORMAL(FC)
The FlashCopy Mirror V2
initialization process ended.
002A COPY ENDED ABNORMAL(FC)
The FlashCopy Mirror V2 copy
operation ended abnormally.
002D
EXPANSION SETTING ENDED
ABNORMAL
The setting process of relationship
expansion ended abnormally.
002E
RELEASING OF THE EXPANSION
SETTING ENDED ABNORMAL
The release process of relationship
expansion ended abnormally.
002F
INITIALIZE ENDED
ABNORMAL(FC)
The FlashCopy Mirror V2
initialization process ended
abnormally.
0030
COPY STARTED AFTER MODE
CHANGED(FC)
The FlashCopy Mirror V2
copy operation started after
the FlashCopy Mirror V2 pair
changed to COPY mode. Please
note that this message occurs
when the mode changes to COPY,
not when the copy operation
starts.
003A
DELETED BY SM
VOLATILIZING(FC)
The FlashCopy Mirror V2
relationship was withdrawn due
to volatilization of the shared
memory.
003B SUSPENDED(FC)
The FlashCopy Mirror V2
relationship n was suspended due
to error or failure.
Setting Hitachi ShadowImage™ for z/OS Options
You can set options for Siz on the Siz Options window (see Figure 41 on page 94). Click the Options tab
on the Siz main window to open the Siz Options window. On the Siz Options window, click and/or
clear the check boxes to set options.
Hitachi ShadowImage for z/OS user guide 93