HP Business Inkjet 2600 Printer series - Manual (Page 22)

2-12 ENWW
4 Select Specify a location , click Browse to locate the installation
files for the operating system the computer is using, and then click
OK .
• For Windows 98 and Windows Millennium Edition, use
DRIVERS\<PRINTER DRIVER>\WIN9X_ME\<LANGUAGE>.
For example, DRIVERS\PCL5\WIN9X_ME\ENGLISH contains
the installation files for the English version of the PCL 5C printer
driver.
• For Windows 2000 and Windows XP, use
DRIVERS\<PRINTER DRIVER>\WIN2K\<LANGUAGE>.
For example, DRIVERS\PCL5\WIN2K\ENGLISH contains the
installation files for the English version of the PCL 5C printer
driver.
5 Click Next , and then follow the instructions on the screen.
6 Click Next , and then click Finish .
7 If you are using Windows 98 or Windows Millennium Edition,
complete steps 3 through 6 again to finish the installation.
Connecting the printer using a parallel cable
Use a parallel cable to connect the printer to the computer if the
computer has a parallel port and is running Windows 95, Windows 98,
Windows Millennium Edition, Windows NT 4.0, Windows 2000, or
Windows XP.
1 Start Windows and make sure no other Windows applications are
running.
2 Insert the Starter CD into your CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, click Start , click Run ,
and at the command line box, type the letter of your computer's CD-
ROM drive followed by :\SETUP (for example, type D:\SETUP).
3 Click Install Printer Driver from the CD menu.
4 Choose your language, and then click OK.
5 Follow the instructions on the screen.
6 Click Connected to this computer , and then click Next .