HP Business Inkjet 2600 Printer series - Manual (Page 27)

ENWW 3-3
7 In the PostScript Printer Description (PPD) File section of the
window that appears, click Auto Setup .
8 Make sure HP Business Inkjet 2600 is selected and click Select .
9 Click Create . The printer icon appears on the desktop.
Mac OS X
10 Open the Print Center (located in the Dock at the bottom of the
screen), and then click
Add Printer .
11 From the pop-up menu, select USB .
12 If necessary, select the Zone.
13 Select HP Business Inkjet 2600 from the list, and then click Add .
A blue dot appears beside the printer name, indicating that this
printer is now the default printer.
Connecting the printer with a network
(Ethernet) cable
When connecting the printer to a network, make sure the
HP Jetdirect print server is installed in the printer before you install
the printer software. For more information about using the HP Jetdirect
print server, see “Installing optional accessories.”
1 Insert the Starter CD into the CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, double-click the CD icon
on the desktop, and then double-click the ClassicInstaller icon (if
you are using Mac OS 8.6 to Mac OS 9.1) or the CarbonInstaller
icon (if you are using Mac OS X). This icon is located in the
Installer:<language> folder of the Starter CD (where <language> is
your language preference).
2 Follow the instructions on the screen.
3 Connect the cable between the ports on the computer and the
printer.
4 If you are using Mac OS 8.6 to Mac OS 9.1, complete steps 5
through 9.
-Or-
If you are using Mac OS X, complete steps 10 through 13.