HP Business Inkjet 2600 Printer series - Manual (Page 79)

ENWW 7-19
Printing on custom-sized paper
! Use the front manual feed when printing a single sheet of custom-
sized or heavy paper that is 102 by 221 mm (4 by 8.7 inches) to 330
by 483 mm (13 by 19 inches). Use the rear manual feed or tray 1
when printing on paper that is 102 by 152 mm (4 by 6 inches) to
330 by 483 mm (13 by 19 inches). Use tray 2 when printing on
paper that is 183 by 191 mm (7.2 by 7.5 inches) to 330 by 483 mm
(13 by 19 inches). Use tray 1 or tray 2 when printing multiple sheets
of paper.
! If your application supports custom-sized paper, set the paper size
in the application before creating and printing the document. If your
application does not support custom-sized paper, set the size in the
printer driver, create the document, and then print it. (You might
need to reformat existing documents to print them correctly on
custom paper sizes.)
To print on custom-sized paper using the front or rear
manual feed
Note If you want to print using the rear manual feed and an optional auto-
duplex unit is installed in the printer, remove the duplex unit and reinstall
the rear manual feed.
For more information about configuring settings in the printer driver, see
“Using the printer driver.”
1 In the printer driver, select Manual Feed as the media source,
either select or create a custom size, and then print the document.
2 When the indicator light on the LCD control panel blinks, insert one
sheet of paper into the front or rear manual feed. For more
information, see “Loading the manual feed units.”
3 If you are using the front manual feed, move the paper guide until it
is flush against the paper.
4 Press R ESUME on the LCD control panel. If you are printing more
than one page, insert another sheet of paper when prompted by the
printer, and then press
R ESUME on the LCD control panel.
Note If you press R ESUME when the front manual feed is out of paper and
paper is still loaded in tray 1, the printer will draw paper from tray 1.
If you begin printing from the rear manual feed and you are prompted to
load media, you can switch to the front manual feed by inserting a sheet
of paper into the front manual feed and pressing
R ESUME .