HP Business Inkjet 2600 Printer series - Manual (Page 89)

ENWW 8-7
! Check the power
If the printer is turned on:
Check to make sure your printer is selected as the current or
default printer. For information about setting the default printer in
Windows, see “Setting the default printer.” For information about
setting the default printer in the Mac OS, see “Changing printer
settings and printing documents.”
If the printer is not turned on:
Press and hold the P OWER button on the printer for a few seconds.
After a brief printer startup, you should see a steady green light
above the button.
Note If you tried to print when the printer was turned off, an alert message
should have appeared on your computer. If the printer was off and you
did not see a message when you tried to print, the printer setup might
be incorrect. Uninstall the printer software by running the uninstaller
program in the printer’s program group or the Add/Remove Programs
utility (Windows) or by selecting the uninstall option in the Installer
(Mac OS). Then reinstall the software that came with your printer.
The printer light blinks amber
An event that requires user intervention or an error has occurred. For
example, a printer cover might not be closed properly, or the carriage
might be jammed.
! Check the LCD control panel
If the message shows a common printer error, see “Common
printer messages.” Follow the recommended actions to resolve the
error.
! Restart the printer
The printer might have a hardware problem. Turn off the printer,
wait for a few seconds, and then turn it on again. In most situations,
this action solves the problem. If the message persists, your printer
might need service. Write down the error code and contact HP.
The printer light turns off while the printer is turned on
A nonrecoverable error has occurred, such as a hardware
problem.
Turn off the printer, wait for a few seconds, and then turn it on again.
In most situations, this action solves the problem. If the message
persists, your printer might need service. Write down the error code
and contact HP.