HP Business Inkjet 2600 Printer series - Manual (Page 48)

5-8 ENWW
CFG IPX/SPX NO
YES Selects whether you want to use the
IPX/SPX menu and set the IPX/SPX
protocol parameters.
In the IPX/SPX menu, you can specify
the Frame Type parameter used on your
network.
! The default is AUTO, which
automatically sets and limits the
Frame type to the one detected.
! For Ethernet cards, frame type
selections include
EN_8023 ,
EN_II , EN_8022 , EN_SNAP .
! For Token Ring cards, frame type
selections include
TR_8022 ,
TR_SNAP .
In the IPX/SPX menu for Token Ring
cards, you can also specify NetWare
Source Routing parameters, which
include
SRC RT=AUTO (default), OFF ,
SINGLE R , or ALL RT .
CFG TCP/IP NO
YES Selects whether you want to use the
TCP/IP menu and set the TCP/IP
protocol parameters.
In the TCP/IP menu, you can specify
BOOTP=YES or DHCP=YES for TCP/IP
parameters to be automatically
configured by a BootP or DHCP server
when the printer is turned on.
If you specify
BOOTP=NO and
DHCP=NO , you can manually set the
following TCP/IP parameters from the
LCD control panel:
! Each byte of the IP address (IP)
! Subnet Mask (SM)
! Syslog Server (LG)
! Default Gateway (GW)
! Idle Timeout period (default is 270
seconds; 0 disables the timeout)
When setting IP numbers, press V ALUE
to increase the number by 1. Press
S ELECT to make your selection.
Message Value Description