HP Business Inkjet 2600 Printer series - Manual (Page 51)

ENWW 5-11
Reset Menu
Use the restore option on this menu with caution. You can lose printer
configuration settings when you select these items. Only reset the
printer under the following circumstances:
! You want to restore the printer’s default settings.
! Communication between the printer and computer has been
interrupted.
Note This option does not reset an HP Jetdirect print server (if it is installed in
the printer) to its default settings. To reset the HP Jetdirect print server,
see “EIO Menu.”
Common printer messages
The table in this section explains messages that can appear on the LCD
control panel.
To resolve an error message, follow the instructions displayed on the
LCD control panel. If following these instructions does not resolve the
error message, turn off the printer, and then turn on the printer again. If
the message persists after performing all of the recommended actions,
contact an HP-authorized service or support provider.
Note This table does not describe all messages that can appear on the LCD
control panel. It explains only the most common messages.
Message Description
RESTORE FACTORY
SETTINGS Restores all values (except those for an
HP Jetdirect print server) to the printer's
predetermined factory values.
Message Explanation Recommended action
[COLOR] INK CARTRIDGE
EMPTY The cartridge is out of ink and
the printer will not print until
the cartridge is replaced. Remove the ink cartridge.
Reinstall the cartridge and try
to print. If the error persists,
replace the empty cartridge.