HP Business Inkjet 2600 Printer series - Manual (Page 59)

ENWW 6-5
! AutoSend
This page allows you to send printer usage information to HP
automatically. HP uses this information on the
hp instant support
page to help you understand your printing patterns. With this
information, you can estimate the amount of ink and paper you use
each month, thus allowing you to manage your printing supplies
more effectively. If AutoSend is enabled, the embedded Web server
sends this usage information to HP.
Note Before you use AutoSend, you must configure the outgoing e-mail server
settings on the Notification page.
HP will treat this information in the manner set out in the Hewlett-Packard
Online Privacy Statement
(
http://www.hp.com/country/us/eng/privacy.htm ).
Configuration
! Asset Tracking
This page lets you name the device for network management
needs and assign an asset number.
! Media Handling
This page lets you configure the printer’s media-handling settings:
• Enabling the “Pick From Other Tray If Empty” setting
• Enabling the transparency sensor
• Selecting the paper type and paper size in each tray
For more information about these settings, see “Configuring paper
trays.”
! Security
This page configures the password information for the embedded
Web server. Password information should only be configured by the
network administrator.
Maintenance
! Diagnostic
This page allows you to perform printer troubleshooting and
maintenance tasks, such as testing paper paths in the printer,
aligning printheads, and cleaning printheads.