HP Business Inkjet 2600 Printer series - Manual (Page 66)

7-6 ENWW
Tips for loading paper
! The default tray size is 215.9 by 355.6 mm (8.5 by 14 inches).
Extend the paper trays to print on larger media, including 11 x 17,
Super B (13 x 19 inches), A3, and B5 media sizes.
! Insert media vertically (portrait orientation). If you want to print
horizontally (landscape orientation), make the selection through
your software.
! When using the front manual feed, always load paper print-side
down with the right edge of the paper aligned against the right edge
of the tray. When using the rear manual feed, load paper print-side
up with the left edge of the paper against the left edge of the
manual feed.
! To prevent jams, load only one type of media at a time into a paper
tray. Also, when adding media, always remove the existing media
and realign it with the new media before loading. For more
information about avoiding media jams, see “Tips for avoiding
jams.”
! Always use media that conforms to the printer specifications. For
more information about types of media that can be used with the
printer, see “Media and paper-handling specifications.”
! Do not use paper that is heavily textured or does not accept ink
well, which can cause poorly filled graphics or text.
! The document margins must match (or exceed) these minimum
margin settings in portrait orientation:
Media size Left and right Top Bottom
U.S. Letter, U.S. Legal,
U.S. Executive media 6 mm (0.25 in) 3 mm (0.12 in) 13 mm (0.5 in)
11 x 17, statement, A3,
Super B (13 x 19
inches), JIS B4, custom
sizes 5 mm (0.2 in) 3 mm (0.12 in) 13 mm (0.5 in)
A4 4 mm (0.134 in) 3 mm (0.12 in) 13 mm (0.5 in)
A5, JIS B5, cards,
envelopes 3.3 mm (0.13 in) 3 mm (0.12 in) 13 mm (0.5 in)