Liquid rate control, Create configuration, Application – Ag Leader Integra Users Manual User Manual
Page 231: Iquid, Ontrol
215
A
PPLICATION
L
IQU
ID
R
ATE
C
ONTROL
A
PPLICATION
A
PPLICATION
L
IQUID
R
ATE
C
ONTROL
DirectCommand allows the variable rate application of single or multiple liquid products. Follow the
procedure below to create an operating configuration.
C
REATE
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Application button
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
to enter a new vehicle. Press
to
continue.
Note:
If selecting Self-Propelled Sprayer from the drop-down menu skip steps 2 and 4.
2. Select Implement
Select an implement from the drop-down list menu, or press
to create a new implement. Press
to continue.
3. Enter Implement Make and Model
Press
to enter Make and Model name. Press
to continue.
4. Select Implement Attachment Type
Use the drop-down list to select an implement attachment method. Press
to continue.
5. Enter Hitch to Implement Axle Distance
Press
to enter the hitch to implement axle distance. Press
to accept.
6. Add Sprayer Functionality
Press
to add sprayer functionality to the implement.
7. Select Controller
Use the drop-down menu to select a controller or press
to add a controller. Press
to
continue.
8. Assign Container Name
Container names default to Main Tank. Press
to enter a new name if desired.
Configuration
Application
Liquid
Application