Ag Leader Integra Users Manual - Manual (Page 307)

291
A
PPLICATION
S
PREADER Press to continue.
2. Select Product Units
When selecting the following fertilizers, use drop-down menu to select the product units:
- Ag Lime
- Pell Lime
- User Defined Lime
- User Defined N-P-K
- User Defined Micronutrient
- Other
Press to continue.
3. Enter Product Name
Default product name appears. Press to enter a new name.
Press to complete product setup or p ress to return to Configuration Setup screen without
making a change.
Created product should appear under the Application heading located on the Product tab of the
Configuration Setup screen.
CREATING DRY FERTLIZER BLENDS
Dry fertilizer blends are set up using the on-screen wizard described in the following steps.
1. Press: Home button > Setup (wrench) button > Configuration (tractor) button > Product tab > Add (+)
button > Mix/Blend button
2. From the Type drop-down menu select Dry Blend
From the Define By drop-down menu select:
• Total amounts - to define blend by amounts going into the bin
• Rate/acre - to define blend by the amounts going on an acre
Press to continue.
3. From drop-drown menu select base units.
Press to continue.
4. Press to start the process of adding components to the blend.
Note: Any liquid herbicides set up within the system can be added to create an impregnated blend product.
5. Select the desired component from the drop-down menu.
More than 7 products can be put part of a Mix/Blend but only 7 or fewer can be active at the same time.
A new product can be set up at this time by pressing and following the Product Setup Wizard.
Product
Mix / Blend