Strip till, Create strip till fertilizer configuration, Trip – Ag Leader Integra Users Manual User Manual
Page 317
301
A
PPLICATION
S
TRIP
T
ILL
A
PPLICATION
S
TRIP
T
ILL
DirectCommand for Strip-Till applicators monitors bin level and fan speed sensors, maintains an
accurate application rate and supports multiple product prescription rate control for up to three granular
products. The Strip Till module supports PWM and Motorized Servo valves as well as Linear Actuator
Product Control. System can be configured for Strip Till fertilizer application or Air Seeder (Planting)
control. To create an Air Seeder (Planting) configuration continue to
“Create Air Seeder Configuration” on
C
REATE
S
TRIP
T
ILL
F
ERTILIZER
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Application button
A wizard will guide you through the process of selecting or creating a vehicle, implement and controller.
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
to enter a new vehicle. Press
to
continue.
Note: It is recommended that Vehicle Offset Information be entered before continuing with the configuration
process.
2. Select Implement
Select an implement from the drop-down list menu, or press
to create a new implement. Press
to continue.
3. Select Implement Attachment Type
Use the drop-down list to select an implement attachment method. Press
to continue.
4. Enter Hitch to Implement Axle Distance
Press
to enter the hitch to implement axle distance. Press
to accept.
5. Add Strip Till Functionality to the Implement
Press
then
to add Strip Till functionality to the implement.
6. Select Controller
Use the drop-down menu to select controller or press
to add a controller. Press
to
continue.
Configuration
Application
Granular
Application
Strip Till