Ag Leader Integra Users Manual - Manual (Page 309)

293
A
PPLICATION
S
PREADER
More than 7 products can be part of a Mix/Blend but 7 or fewer can be active at the same time.
Press to continue.
3. Configure Product Mix
Product Blends can be adjusted after they are
created by:
-a.activating or de-activating products
-b.changing rate or total amount of a product
-c.changing total amount of the product or overall rate of
product application
These values can be changed on the Configure
Product Mix screen which is available in the event
setup wizard or by pressing a product line on the
home screen.
A product can not be active with a rate of zero.
When all product mixes have been configured press .
4. Select Region and Controlling Product
Select Region from drop-down menu or use press
keyboard button to name region.
Select Controlling Product for the Mix/Blend.
Press to complete the process of setting up
the dry blend or p ress to return to Home screen
without setting up an event.
R
UN
C
ONFIGURATION
Once a configuration has been completed, the Map View button appears at the bottom of the
Home screen. Press the Map View button to see the Map screen. The map below is displayed
in Zoom to Extent view.
Below is an example of a Spinner Spreader Granular Product Control applying two products.