Ag Leader Integra Users Manual - Manual (Page 233)

217
A
PPLICATION
L
IQU
ID
R
ATE
C
ONTROL
16. Enter Hitch Point Offsets
Press check box if implement provides a hitch point. Press to enter distance and drop-down
menu to enter “to the left” or “to the right”. Press to enter distance Forward or Backward. Press
to continue.
17. Enter Implement Name
Press to enter a name for the implement. Press to continue.
18. Select Implement.
Press to continue.
19. Select Second Implement.
Use drop-down menu to select Implement or press to add second implement.
20. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and configure Auxiliary Channel.
Press Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard.
21. Enter Configuration Name
A suggested name for the configuration appears. If desired, Press to enter a different name.
Press when complete.
The complete configuration should now appear under the Application heading located on the
Configuration tab of the Configuration Setup screen.
The Operating Configuration is now able to be selected when starting a new Field Operation with the
Field Operation Wizard. For more information, see
“Setup Event” on page 45 .
I
MPLEMENT
O
FFSETS
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button >Offsets button
Configuration
Select Your Specific
Configuration
Offsets