Ag Leader Integra Users Manual - Manual (Page 68)

52 Firmware Version 5.4
Select the Autoswath channel to apply the reference
map to
Not selecting a channel will load the reference map as
a visual only
Press to complete Reference Map Wizard.
Note: Using Reference maps for AutoSwath functionality is
applicable to planting and application configurations only.
Legend Settings
On the Legend Select screen, press legend, and the Legend Settings screen appears. The
Legend Settings screen allows you to change the default legend.
Notes:
• The Legend Settings screen can also be accessed by
pressing the Edit Legend button on the Setup screen’s
Product Tab.
• Legend settings changes that are made at the Legend
Settings screen will affect all regions.
The Legend Settings screen includes the following items:
• Attribute
Appears at the top left of the Legend Settings screen. Attributes shown for Harvest
include Yield and Moisture. The Rate attribute is shown for Planting and Application
operations. You can adjust the color scheme, spacing and ranges as they appear on the
map screen, by using the buttons described below.
• Average
The Average button changes the average rate for the legend. Press to specify the average of the
ranges shown on the map legend.
• Range Spacing
The Range Spacing button changes the difference between the rates in one color range. Press to
edit the legend range spacing value, which is the total number of units represented by a particular color.
• Ranges
The Ranges / change the number of range increments displayed in the legend.
Save as Product
Legend
Reset to Default
Legend
Automatic
Legend
Legend Settings
Attribute: Rate
16.0 - (20.0)
Average
Range Spacing
10
175
Color Scheme
Green-Yellow-Red
Ranges
5
12.0 - 16.0
8.0 - 12.0
4.0 - 8.0
(0.0) - 4.0
Attribute: Yield
205 - (225)
185 - 205
165 - 185
145 - 165
(125) - 145