Status screen, Tatus, Creen – Ag Leader Integra Users Manual User Manual
Page 272
Advertising
256
Firmware Version 5.4
Firmware Version 5.4
S
TATUS
S
CREEN
The status screen provides the user with
readout of the connected controller’s
target rate, actual rate, section status,
and connection status.
Note:
The target rate is not editable from the VT screen. This can only be done from the Run Screen.
Serial Connection Status – Indicates if the ISOBUS Serial Application Rate
module is communicating with the connected controller.
Target Rate Status – Indicates the target rate sent to the connected controller.
Actual Rate Status – Indicates the actual rate received from the connected
controller.
Boom Section Status – Indicates the on/off status of the
boom sections sent to the connected controller.
Advertising