American Fibertek Scout SS1 - Manual (Page 12)

12
Auxiliary Output Connections:
Output signals used to trigger external devices based on inputs for hard contacts, sensor devices
and internal sources. Trigger sources are determined by operator programming. Auxiliary outputs
are Form C and may be wired as normally opened (N/O) or normally closed (N/C).
Hard Contact Input Connections:
These are used to connect external contact closures that are used to trigger alarms. The operator
can also program each of these inputs to create an auxiliary output.
Auxiliary Input can be wired operation either as Normally
Closed (N/C) or Normally Opened (N\O).
Alarm in is a Potential Free Contact ground and Hot contact
can be inserted into any opening.