American Fibertek Scout SS1 - Manual (Page 34)

34
Fill in the name and location of your Scout. These names will appear in all logs, emails
and records.
Global Settings:
Temperature
Use the drop down menu to select the
Fahrenheit or Celsius temperature scale.
Warning-Alarm Delay
Scout probes sample environmental
conditions once every 10 seconds and verify
conditions after 3 samples or 30 seconds.
This
delay is programmable and determines the
duration a condition must be valid prior to
taking any action.
Alarm Alerts: To sense an alarm or warning condition a probe is polled three times to avoid
any potential for false alarms. As each poll is 10 seconds the total time to confirm if a
condition is valid is 30 seconds. To further avoid false alarms the Master Admin can program
a Warning- Alarm delay which will require the condition be valid for the total programmed
time prior to taking any action.
Global Settings: Sensor Status
This setting is used to display sensor status
when communication occurs between the
sensors and Scout. It is a notification only
and its operation will not affect warning or
alarm reporting. Use the drop menu to select
On or OFF.
Email Address
This email address will receive the following
information:
1. IP address that occur when Scout is operated in the DHCP mode. When the client receives a
notification IP Address has changed, this new IP Address must be entered in the client web
browser.
2. When an existing Sensor has been unplugged or a new Sensor inserted when Scout is ON.
3. When Scout senses an internal voltage or temperature warning or alarm condition. You can
enter more than one Email address. Multiple email addresses are separated by a space.