American Fibertek Scout SS1 - Manual (Page 33)

33
These settings are not user adjustable.
Name and Location
Global Settings
Internal Values and Warnings
Scout monitors its own internal temperature and voltage values. Operating at too high or too low
of these values can result in decreasing Scout’s performance or turning Scout off. Extreme
operating conditions could further result in damaging Scout.
The best precaution against environmental damage to Scout is to properly install and operate the
unit. When mounted in a rack at least 1RU spacing should be provided on both Scout’s top and
bottom. Installations with unstable or questionable power sources should use back up generators.
In all cases the use of filtered power supplies is strongly recommended.
Scout contains one internal fan which is designed to activate at temperatures higher than those
that can result in damage to Scout. The use of temperature controlled activation also contributes
to extending fan life as it doesn’t have to operator under proper temperature conditions.
When these warning levels are reached, Scout will issue email alerts to the address programmed
in Global Settings.
Scout will trigger an internal alarm when any of the following conditions exist:
CPU I/O voltage is less than 2.25 volts or greater than 2.75 volts.
CPU core voltage is less than 1.17 volts or greater than 1.43 volts.
CPU voltage supply is less than 2.97 volts or greater than 3.63 volts.
Main Voltage Supply is less than 4.5 volts or greater than 5.5 volts.
Power Supply temperature (temp1) is less than -25C or greater than +59C.
Airflow temperature (temp2) is less than -27C or greater than +54C.
CPU temperature (temp3) is less than -16C or greater than +60C.
The internal fan will be turn on when any of the internal temperatures exceed preset limits:
temp1 > 55C or temp2 > 55C or temp3 > 65C
An internal alarm will be issued when any of the internal temperatures exceed preset limits:
temp1 > 60C or temp2 > 60C or temp3 > 70C