American Fibertek Scout SS1 - Manual (Page 40)

40
IP Settings
Default IP Settings
Scout’s default settings are displayed to the right.
DHCP is set to off in the default settings and
the default HTTP port is 80.
IP Address: 192.168.0.246
Subnet mask: 255.25.255.0
Gateway: 192.168.0.143
DHCP
When DHCP is enabled Scout will report any
changes in its IP Address to the email address
entered in the Global Settings. (Master Admin
function)
Port Communications
Use the drop down box to select the speed of
your Ethernet communications port. Auto will
select the speed based on the input.
Port Communications
Use the drop down box to select duplex
communication as Half or Full. If you are
uncertain, select None.
Alert Console IP Address:Port
The Alert Console allows you to program an IP address and port to receive alerts responses to
alarms and warnings. The receiving client computer must allow these alerts to be received. Up to
four addresses and ports may be entered separated by a space.
Network Settings: Saving your settings
Clicking the Save button will result in a pop up
asking you to confirm your settings. Click OK to
confirm. Click Cancel to return to the previous
screen. Remember to make a note of your new
IP Address.
Network Settings: Settings Accepted
When Scout has successfully accepted your
changes it will issue a pop up. Click OK to
continue set up.