American Fibertek Scout SS1 - Manual (Page 46)

46
Front Panel Manual Auxiliary Operation
Scout’s Auxiliary functions can be
controlled from Status View by clicking
on any of the auxiliary buttons.
Temp Airflow Humidity = display the current values and status. Warnings will be displayed in
amber and alarms in red. Warning and alarm values are determined by user set up.
Voltage Frequency and Power = display the current values and status. Warnings will be displayed
in amber and alarms in red. Warning and alarm values are determined by user set up.
Refresh Rate
Scout’s status is viewed over the network on a client computer. Changes can only be viewed
when the client’s web page is refreshed. This section allows the operator to select the refresh rate
duration or no refresh at all. The Refresh status is reflected in the Status View’s header.
Refresh Rate Enabled/Disabled
This selection enables or disables the client’s status view refresh. Refresh must be enabled to
avoid a 20 minute auto log and to see event warnings. If Scout is in the no refresh rate, the title
will be red.
Event Warning Enabled/Disabled
This selection enables or disables the Event Warning feature. It must be enabled in order to pop
ups when the Scout’s Status View is minimized. It is only available in Refresh mode.
Refresh Rate/Event Warning Status Confirmation
This section will confirm the sections made for items 8,9 and 10. If this confirmation does not
reflect the desired operation, please change these settings. If the Event warning is off, it will not
appear in this area.
Scout must be in the refresh mode with events warning enabled in order to see pop ups and
display tool bar warnings.