American Fibertek Scout SS1 - Manual (Page 79)

79
Default Settings
Scout is programmed with several default settings. The default settings are designed to help you
limit your programming to only functions and features that are specific to your operation. Please
note: Scout cannot be operated with only its Default settings in place. Scout is designed to
operate in the specific environment that you assign.
It is strongly suggested that once you have completed your programming, you save you
configuration. If programming is lost for any reason you can easily restore it.
Scout is designed to maintain its programming memory in the event power is lost.
Start Up:
Upon entering the user name and password Scout will default to the Status View screen.
The program modes displayed on the viewer screen left side will be determined by the
security level assigned to the user name.
The default password in for the default user name for Admin, ITAdmin, and SecAdmin,
is "Password”. User names and Passwords are case sensitive. The user name is limited to
10 characters. The password is limited to 8 characters.
Temperature F
Warning alarm delay
4 hours
Sensor status Off
Network Settings:
IP Address: 192.168.0.246 (Before firmware 20110504: 192.168.10.11)
Net Mask: 255.255.255.0
Gateway: 192.168.0.143 (Before firmware 20110504: 192.168.10.1)
DHCP Disable
DNS Disable
Port Communications:
Auto
None
Probe Names:
If a probe has not been provided a name, it will not appear in any viewing functions.
The system will only display the number of probes that are actually connected to Scout.
If a probe is not connected to Scout it will not be displayed in the tree or show up in any
programming function. When a probe is connected to scout the probe ID number will
automatically be registered. The probe ID will serve as the probe name until a new name
is provided by the operator. The probe ID will appear in all programming and tree
locations where the probe name is required until such time when the operator provides a
name.
Probe names are stored in the Scout Probe limiting their names to 16 characters.