ATEN ALTUSEN KM0832 - Manual (Page 105)

Chapter 4. OSD Operation
89
(continued from previous page)
Setting Function
USER ACCESS
SETTING 1. The user list appears.
2. Select the user for whom you wish to modify port access
rights. A list of all ports appears.
3. Select a port, and then set the User Access Type: NONE—
no port access; VIEW—users can only view video from the
port; FULL—users can view video from the port and control
the port.
Note: If NONE is set, the port will not show up in the user's
port list on the OSD main screen.
4. Press [Esc] to exit. The User Access Type you selected is
assigned to the user.
5. Repeat this procedure for all the ports in the list.