ATEN ALTUSEN KM0832 - Manual (Page 107)

Chapter 4. OSD Operation
91
(continued from previous page)
(continues on next page)
Setting Function
PORT ACCESS
(cont.) To grant port access to a user:
1. Select ADD USER. The user list appears.
2. From the list, select the user to whom you wish to grant access
to the port.
3. Press [Y] to confirm; or, press [N] to cancel.
To set the User Access Type:
1. Select SET USER ACCESS TYPE. A list of all users who have
been added to the port appears.
2. From the list, select the user for whom you wish to set the User
Access Type.
3. Set the User Access Type: NONE—no port access; VIEW—
users can only view video from the port; FULL—users can
view video from the port and control the port.
Note: If NONE is set, the port will not show up in the user's
port list on the OSD main screen.
4. Press [Esc] to exit. The User Access Type you selected is
assigned to the user.
To revoke user access for a port:
1. Select DELETE ACCESS USER. A list of all users that have
been added to the port appears.
2. From the list, select the user for whom you wish to revoke
access to the port.
3. Press [Y] to confirm; or, press [N] to cancel.