ATEN ALTUSEN KM0832 - Manual (Page 58)

KM0832 User Manual
42
3. Under System Date & Time, select one of the following three options to set
the date and time.
Š Synchronize with my computer: Select this option to synchronize the
date and time of the KM0832 with that of the computer that you are
using to access it.
Š Set manually: Select this option to manually enter the date and time.
You must enter the date and time in the following way:
a) Date: Enter the date in Arabic numerals, year first, then the month,
followed by the day. The year must carry four digit places, while the
month and day each must carry two digit places. The year, month,
and day each must be separated by a hyphen. For example,
December 5th, 2005, should be written 2005-12-05.
b) Time: Use 24-hour notation to enter the time as
hours:minutes:seconds. For example, three o'clock in the afternoon
should be written 15:00:00.
Š Automatically synchronize with an NTP server on the Internet: Select
this option to synchronize the date and time of the KM0832 with that
of a Network Time Protocol (NTP) server on the Internet. To use this
feature you will need to open UDP port 123 in your firewall.
4. From the Time Zone drop down list, select the time zone of the region
where the KM0832 resides.
5. Select Daylight Saving Time (Summer Time) if it is used in your region.
6. Click Save. Your settings are saved and the system date and time are
updated.