ATEN ALTUSEN KM0832 - Manual (Page 99)

Chapter 4. OSD Operation
83
F2: VIEW
Many of the OSD functions only operate on the computers that are currently
displayed (listed) on the main screen. This function lets you broaden or narrow
the scope of which ports the OSD lists on the main screen. The submenu
choices and their meanings are given in the table below.
(continues on next page)
Setting Function
VIEW MODE Allows you to select which computers are listed in the OSD
main screen. Choices are:
PERSONAL—The OSD lists the ports that the user has set
as personal. See SET PERSONAL VIEW (below).
ACCESSIBLE—The OSD lists only those ports that the
user is permitted to access. See PORT ACCESS, p. 90.
ACCESSIBLE + POWERED—The OSD lists only those
ports that the user is permitted to access and that have
their attached computers powered on.
The default is ACCESSIBLE + POWERED.
SET PERSONAL VIEW If there are KM0832 switches cascaded from the ports of
the master switch, you can create shortcuts to the
computers of those lower level switches that will appear in
the OSD list.
To add a shortcut:
1. Select ADD SHORTCUT. A box appears.
2. Enter the port ID number of the computer for which you
wish to create a shortcut (e.g. 1-1-1). For a discuss on
port ID numbering see p. 80.
To delete a shortcut:
1. Select DELETE SHORTCUT. A list of shortcuts
appears.
2. From the list, select the shortcut that you wish to delete.
3. Press [Y] to confirm; or, press [N] to cancel.