ATEN ALTUSEN KM0832 - Manual (Page 79)

Chapter 3. Administrator Utility
63
Setting Function
Change
Password Enter the old account password. Enter a new password, and then
reenter the password to confirm it. Or, do not enter anything to
leave the password unchanged.
OSD Activation Selects which Hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the Ctrl key combination may conflict with programs running
on the computers, the default is the Scroll Lock combination.
Set Logout
Timeout This function allows you to specify the number of minutes to elapse
before an inactive user is timed out of the OSD. If there is no input
from the user for the specified amount of time, the user will be
logged out automatically.
Screen Blanker If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, then press [Enter]. A setting of 0 disables this function.
The default is 0 (disabled).
Hotkey
Command Enables / Disables the Hotkey Command function in case a
conflict with programs running on the computers occurs. The
default is enabled.
Set Beeper When set to ON, the beeper sounds whenever the port is switched,
when activating the Auto Scan function (see page 97), or when an
invalid entry is made on an OSD menu. The default is ON.
Set Idle Timeout If there is no input from the console accessing a particular port for
the amount of time set with this function, the port is released,
allowing it to be accessed by the other consoles.
To set the timeout value, key in a number from 0–255 seconds,
then press [Enter].
If the number is 0 [zero], this function is disabled. The default is 5
seconds.