ATEN ALTUSEN KM0832 - Manual (Page 69)

Chapter 3. Administrator Utility
53
Accessing Ports
All ports in the station are listed on the Port Select Webpage. Use the button at
the bottom of the Webpage to restore station and port defaults.
To open the Port Select Webpage:
1. If you are not logged in to the KM0832 Administrator Utility, then open
the KM0832 Login page and login. The KM0832 Administrator Utility
Main Screen will appear.
2. From the Administration menu, choose Port Management. The Port Select
Webpage appears.
The Port Select Webpage is divided into two columns. Port IDs, or port
numbers, are listed in the column on the left in ascending order. Click the port
ID to access the Port Management Webpage for that port. If a port has been
assigned a name, the name appears to the right of the port ID in the port note
column. The button at the bottom of the Webpage is described in the table
below.
Managing Port Access
Each port has an individual Port Management Webpage that is used to set port
access rights, assign port names and configure other port settings. This also is
true for cascaded child stations.
Button Description
Restore Defaults
Click to revoke port access for users and groups, remove
station names and port notes, and restore factory default
settings for the Webpage Session Timeout, Port Operating
System and Port Language fields. See Factory Default
Settings, page 108.