ATEN ALTUSEN KM0832 - Manual (Page 71)

Chapter 3. Administrator Utility
55
In the middle of the Webpage are six sets of arrows. Each set contains two
arrows: one facing leftward (<) and the other facing rightward (>), which
correspond to the boxes immediately to the left and right, respectively. Arrows
are used to move users and groups from the boxes on the left into the boxes on
the right and vice versa.
Note: 1. You cannot add more than 32 users and 32 groups to a port. If you
need to add more than 32 users to a port, first add the users to groups
and then add those groups to the port.
2. If a user is granted both user and group access rights to the same port,
the user access rights will be applied and not those of the group.
Box Name Description
Available
Users All KM0832 users listed in this box do not yet have permission to access
the port. Although super administrators and administrators also are listed
here, they already have full access and do not need to be added to the
ports.
Available
Groups All KM0832 groups are listed by group name in this box. Groups listed in
this box do not have permission to access the port.
No Access
Users Users who are restricted from access to the port. Administrators can
move certain users here to prevent others from accidentally granting port
access to them. If a user listed in this box is a member of a group that has
permission to access the port, placing the user in this box restricts the
user from accessing the port.
View Only
Users Users who are only permitted to view video from the port.
Full Access
Users Users who are permitted both to view video from the port and to control
the port. If a cascaded station is in the port, the user will not be able to
access the ports of that station until granted access rights to the individual
ports.
No Access
Groups Groups which are restricted from access to the port. Administrators can
move certain groups here to prevent others from accidentally granting
port access to them.
View Only
Groups Groups which are only permitted to view video from the port.
Full Access
Groups Groups which are permitted both to view video from the port and to
control the port. If a cascaded station is in the port, the Group will not be
able to access the ports of that station until granted access rights to the
individual ports.