ATEN ALTUSEN KM0832 - Manual (Page 55)

Chapter 3. Administrator Utility
39
IP Address
The KM0832 has the option to either manually enter a static IP address or use
a DHCP server on your network to dynamically assign one. If you enable a
DHCP server to assign an IP address to the KM0832, you can enable the
KM0832 to send an e-mail notification when the IP address changes. See
System Event Reports, page 40.
To use a DHCP server to assign an IP address, click Yes under DHCP enabled.
To manually assign an IP address:
1. Under DHCP enabled, click No.
2. In the fields under Manual IP address, enter the IP address, subnet mask,
default gateway, and primary DNS server. You also can enter an alternate
DNS server; however, it is not required.
Port Settings
Enter the network ports that the KM0832 will use to transfer Webpages and
communicate with client programs. Typically, port 80 is used for Hyper Text
Transfer Protocol (HTTP) communications, while port 443 is used for HTTPS
(HTTP over Secure Socket Layer). Failure to assign a port number for each
field will cause the KM0832 Administrator Utility to function incorrectly.