ATEN ALTUSEN KM0832 - Manual (Page 119)

Chapter 5. Hotkey Operation
103
Hotkey Beeper Control
The beeper (see SET BEEPER, p. 86) can be toggled on and off by means of a
Hotkey. To toggle the beeper, enter the following Hotkey combination:
1. Invoke HKM (see p. 99).
2. Press [B]
After you press B, the beeper toggles on or off. The command line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit HKM.
Hotkey Summary Table
[Num Lock] + [ * ]
or
[Num Lock] + [ - ]
[port ID] [Enter] Switches access to the computer that
corresponds to that port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n
seconds—where n is a number from 1–
255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or
left-click pauses Auto Scanning.
When Auto Scanning is paused, pressing
any key or another left-click resumes Auto
Scanning.
[
←]
Skips from the current port to the first
accessible port previous to it.
[
→]
Skips from the current port to the next
accessible port.
[B] Toggles the beeper on or off.