ATEN ALTUSEN KM0832 - Manual (Page 56)

KM0832 User Manual
40
System Event Reports
The KM0832 can be configured to send an e-mail notification whenever the
DHCP server assigns a new IP address to the KM0832. Enable the Mail
Notification feature and specify the Simple Mail Transfer Protocol (SMTP)
server address, information for a valid e-mail account on the server, and the e-
mail address of the person to whom the message should be sent.
To enable system event reports:
1. Under System Event Report Settings, click Yes to enable Mail Notification.
2. Enter the address of the SMTP server. If your server requires
authentication, click Yes to enable SMTP Authentication.
3. In the Account Name field, enter the username for a valid e-mail account
on the SMTP server in Step 2.
4. In the Password field, enter the password for the e-mail account in Step 3.
5. In the From field, enter the e-mail address for the e-mail account in Step 3.
6. In the To field, enter the e-mail address of the person to whom the
notification message should be sent.
7. Click Save.