ATEN ALTUSEN KM0832 - Manual (Page 82)

KM0832 User Manual
66
Performing the Upgrade
To upgrade the firmware:
1. If you are not logged in to the KM0832 Administrator Utility, then open
the KM0832 Login page and login. The KM0832 Administrator Utility
Main Screen will appear.
2. Click the Upgrade icon. The following dialog box appears:
3. Click OK to enter Firmware Upgrade mode. This may take a few minutes
while the system prepares to upgrade the firmware. Users with active
sessions in the OSD will be informed that they should log out. (Some
consoles may be automatically logged out.)
After a few minutes, the Firmware Upgrade Webpage appears. It displays
the current firmware version(s) of the KM0832 module(s).
4. Click Browse. The Choose file dialog box appears.
5. Navigate to the directory where the new firmware upgrade package file
was saved, select the file, and click Open. The path and filename appear in
the Firmware Image File field.
6. Select or deselect Check Firmware Version.
Š If you select Check Firmware Version, the Utility compares the
firmware level of the KM0832 with that of the upgrade files. If it finds
that the current firmware version of the KM0832 is higher, a dialog
box appears that gives you the option to Continue or Cancel.
Š If you do not select Check Firmware Version, the Utility installs the
upgrade files without comparing the version levels.